This 15 oz white sublimatable ceramic mug is perfect for an effortless customization experience. With its 5” diam and 4.5” height, you can easily add your artwork to create a more personal touch. And for added protection and presentation, it comes in a white corrugated cardboard box. Sublimation printing ensures that your customization will last long-term.

An order of 1 = 1 mug/box

Mug heat press settings:
400 degrees F
5:00 - 6:00 minutes
pressure - light to medium.

Steps:
1. Cut your transfers so that the transfer is slightly larger vertically than
the mug.
2. Wrap the transfer around the mug and tape the two ends near the handle.
3. Wrap a piece of scratch paper around the transfer and mug and tape the two
ends.
4. Center the mug in the mug press.
5. Close the mug press using the mug heat press settings above.
6. Remove items from the press immediately. Use heat resistant gloves if
necessary - the items will be very hot.
7. Dip the mug into warm water.
8. Once cool enough to handle remove from water and remove transfer and
scratch paper.

Oven with wrap settings:
380-400 degrees F
11 to 13 minutes

STEPS:
1. Position transfer onto the mug using heat tape to secure the transfer to
the substrate.
2. Place mug and transfer into shrink wrap cylinder.
3. Using the heat gun carefully direct hot air onto the shrink wrap until
tight around the Polar Camel and transfer.
4. Place mug in the oven with recommended settings listed above.
5. Pull from oven and remove wrap and paper. Caution contents will be hot
use heat resistant gloves for safety.
6. Place the mug into a bucket of warm water

Note: The recommended settings above may need adjustments for best results.
Settings will vary depending on the mug press brand and model, ink, paper,
and atmospheric conditions.